Heat Exchanger Before And After
The Problem: That heat exchanger was in rough shape—tubes packed with grimy deposits, barely letting heat through.
The Fix: The Tech Sonic's cleaning process, using an ultrasonic bath, typically took 4-8 hours per heat exchanger, depending on the condition of the bundle.
The Results: The method was 100% successful at cleaning the inside and outside heat exchangers.
For more details, check our referred paper at HeatExchangerFouling.com
Heat Exchanger Tubes Before And After
What the Problem Was: Our heat exchanger tubes were a mess—completely gunked up and making everything work harder than it should. We knew we had a problem when performance started to drop.
How It Was Cleaned: Tech Sonic’s ultrasonic cleaning got into every nook and cranny, breaking down all that built-up grime without damaging a thing.
The Results: Huge difference! The tubes are spotless, efficiency is back, and we’re saving on energy and maintenance headaches. Wish we’d done this sooner!
Valves Before and After
The Problem: Severe rust buildup clogged the valve, affecting performance and reliability.
The Fix: We eliminated rust and deposits.
The Results: The Tech Sonic cleaning process neutralized and cleaned valves in 45 minutes, compared to the previous cleaning 10-12 hours. For more details on Cleaning Efficiency, check our ConocoPhllips case study.
Filters Before and After
The Problem: The filter was clogged with debris, severely impacting system performance.
The Fix: Half of the fouling was removed in Tech Sonic ultrasonic bath after 10 minutes.
The Results: HPWJ requires a lot of effort, but Tech Sonic's ultrasonic method can clean multiple parts and 100% clean after only one rinse without damage.
The Problem: That heat exchanger was in rough shape—tubes packed with grimy deposits, barely letting heat through.
The Fix: The Tech Sonic's cleaning process, using an ultrasonic bath, typically took 4-8 hours per heat exchanger, depending on the condition of the bundle.
The Results: The method was 100% successful at cleaning the inside and outside heat exchangers.
For more details, check our referred paper at HeatExchangerFouling.com
What the Problem Was: Our heat exchanger tubes were a mess—completely gunked up and making everything work harder than it should. We knew we had a problem when performance started to drop.
How It Was Cleaned: Tech Sonic’s ultrasonic cleaning got into every nook and cranny, breaking down all that built-up grime without damaging a thing.
The Results: Huge difference! The tubes are spotless, efficiency is back, and we’re saving on energy and maintenance headaches. Wish we’d done this sooner!
The Problem: Severe rust buildup clogged the valve, affecting performance and reliability.
The Fix: We eliminated rust and deposits.
The Results: The Tech Sonic cleaning process neutralized and cleaned valves in 45 minutes, compared to the previous cleaning 10-12 hours. For more details on Cleaning Efficiency, check our ConocoPhllips case study.
The Problem: The filter was clogged with debris, severely impacting system performance.
The Fix: Half of the fouling was removed in Tech Sonic ultrasonic bath after 10 minutes.
The Results: HPWJ requires a lot of effort, but Tech Sonic's ultrasonic method can clean multiple parts and 100% clean after only one rinse without damage.